ECOO-BL-UV Blanket
Application: UV printing. Appropriate to package and metal UV printing.
Construction: 4/3ply
Thickness: 1.97/1.70±0.02mm
Color: Jacinth
Compressible layer: Microspheres
Surface: Micro-ground and polished
Roughness: 0.80-1.0μm
Hardness: 76-82 Shore A
Elongation: ≤ 0.9%
Tensile strength: ≥ 85
Characteristic:
UV solidification and ultraviolet rays resistant. Convenient use, low thickness reduce for good print quality.
Diagram:
Attention:
Before installation, please measure the thickness of blanket for adjusting the press accurately;
While installation, please use the constant wrench to tighten gradually;
After installation, please clean the rubber surface and ready for print;
During the use, please often use the special solvent to clean the rubber surface for extending the useful time.